What is the replacement procedure of the automobile oil filter?

1. Warm up the engine.

2. Open the engine oil filler cap.

3. After lifting the vehicle, remove the engine guard plate, remove the oil drain screw of the oil pan, and drain the old engine oil.

4. Put down the vehicle and remove the old oil filter.

5. Unpack the new oil filter, take an appropriate amount of new oil and apply it to the sealing ring, use a clean cloth to wipe off the oil and dirt on the joint part of the filter, screw on the new filter, and filter with an appropriate oil Tighten the cleaner wrench with a certain torque and wipe clean the appearance and joints of the new filter.

6. Screw on the oil drain screw, put down the vehicle, add new oil, check the oil level, start the vehicle to idle and run for a while at medium speed, during which time pay attention to observe whether the oil filter is leaking, and complete the operation after everything is normal.